A burst pipe or a roof leak during the rainy season can soak a Eugene home. We extract the standing water, set up dehumidifiers and air movers, and take moisture readings every day until the floors and framing test dry.
More about Water Damage
Available 24/7 · Eugene and nearby areas
Mold Remediation in Eugene, OR
Foggy windows, crawl space dampness, or a leaking shower valve can lead to mold. Our crew handles mold remediation in Eugene, OR, finds the moisture behind it, and dries the space out. Call any time, day or night.
Call (503) 871-484445minutes
IICRC Certified Firm#70120685
We work with all major insurance carriers
Mold help
Mold in Eugene homes
The southern Willamette Valley gets most of its rain from fall through spring. Those gray, wet months keep crawl spaces, siding, and roofs damp. When moisture finds a gap, it often stays long enough for mold to grow.
Crawl spaces are a big concern. Many Eugene homes sit on vented crawl spaces over damp soil. Without a good vapor barrier, moisture rises into the floor framing all winter.
Closed windows and indoor heat in cool weather cause condensation. It’s worst in older homes and student rentals near the university with weak bathroom fans.
Homeowners, property managers, and business owners across Lane and Linn counties call us about mold all year round.
Call Now (503) 871-4844Mold remediation at a glance
What’s included
Getting the crawl space and indoor humidity under control, sealing off the area, removing moldy materials, HEPA cleaning, drying, and repairs.
Typical timeline
A window sill or bathroom ceiling takes a day or two. A crawl space or several rooms can take a week or more.
How cost is set
How much area is affected, whether the crawl space needs a new vapor barrier, what comes out, and the repairs.
First visit
Call (503) 871-4844A free inspection and estimate before any work starts.
Found mold?
What to do when you find mold
Finding mold is stressful, but you have time to do this right. Acting in the first day or two keeps it from spreading.
Not sure how big the problem is? Call and talk it through with our crew.
Call (503) 871-4844What to do
Look for the water
Check above and around the mold for a drip, a damp spot, or a stain. Stopping the water stops the mold from growing.
Bring the humidity down
Run the air conditioning or a dehumidifier. The EPA recommends keeping indoor humidity below 60%, ideally between 30% and 50%.
Take photos
Photograph the mold and any water damage before anything is cleaned. Your insurance company may ask for them.
Clean small spots the right way
For a patch under about 10 square feet, the EPA says you can usually clean it yourself with detergent and water. Wear gloves, eye protection, and a mask.
Keep sensitive people away
Anyone with asthma, allergies, or a weak immune system should stay out of the area until the mold is gone.
What not to do
Don’t scrub or sand it dry
Dry mold sends spores into the air and through the house. Keep the surface damp while you clean it, or leave it for a pro.
Don’t bleach it and paint over it
Bleach can whiten the surface, but on drywall and wood it doesn’t reach the mold growing inside. Paint over mold peels, and the mold keeps growing underneath.
Don’t point fans at it
Fans blowing across mold carry the spores into other rooms.
Don’t run the heat or air if the mold is in the ducts
The system will blow spores through the whole house. Leave it off until it’s been checked.
Don’t buy a test kit first
If you can see mold, the EPA says testing usually isn’t needed. Spend the money on finding the leak.
Where mold hides
Where we find mold in Eugene homes
In Eugene, mold usually comes from the long rainy season, a damp crawl space, or indoor condensation.
Crawl Spaces
Damp soil and missing or torn vapor barriers keep floor framing and insulation wet through winter.
Attics
Roof leaks under moss and debris, plus poor attic ventilation, trap moisture under the roof deck.
Bathrooms and Laundry Rooms
Steam and dryer moisture with weak ventilation condense on walls and ceilings.
Windows and Exterior Walls
Warm indoor air condenses on cold Eugene windows and wall corners during the wet months.
Wet Siding and Gutters
Overflowing gutters and rain driven against siding can wet the wall behind it.
Plumbing Leaks
Slow leaks under Eugene sinks and inside walls feed hidden mold.
How we remove mold
How we remove mold
In the valley’s wet months, mold returns quickly if the moisture isn’t controlled. We start by finding whether it’s the crawl space, condensation, a roof, or a pipe.
We seal the work area. Plastic barriers and HEPA air scrubbers keep spores from spreading through a closed-up winter house.
We take out what mold has grown into. Insulation, drywall, and carpet with growth are bagged and removed, and Douglas fir framing with surface growth is cleaned and sealed.
We dry and help keep it dry. Readings must match a dry room before repairs. We can talk through vapor barriers, ventilation, and gutter fixes.
What the signs usually mean
Green-black spots along window sills in February
What it usually meansIndoor humidity condensing on cold glass during the wet season
What to doRun fans, wipe sills daily, and have the frames and sills cleaned.
A musty smell from the crawl space after heavy rain
What it usually meansDamp soil and moisture under the floor
What to doHave the crawl space and vapor barrier checked.
Speckled growth on the bathroom ceiling of a campus rental
What it usually meansShower steam with an undersized or unused fan
What to doRun or upgrade the fan; if it keeps returning, have the ceiling checked.
Stains on an interior wall near the gutters
What it usually meansOverflowing gutters soaking the wall
What to doClear the gutters and have the wall checked.
Damp closet on an outside wall
What it usually meansCold wall surfaces and poor airflow
What to doOpen up the closet and have the wall checked.
A stale smell in a Eugene house with nothing visible
What it usually meansGrowth hiding in a wall, under the subfloor, or in the attic
What to doBook an inspection so we can take moisture readings in hidden spots.
What can be saved
What can be cleaned and what gets replaced
Around Eugene and Springfield, what we clean or replace depends on the material, how long it stayed wet, and how far growth reached. The inspection confirms each item.
Glass, tile, metal, and stone
Usually cleanedWindow glass, tile, and aluminum frames clean up completely once the moisture is under control.
Floor joists and subfloor
Usually cleanedDouglas fir framing with surface growth can be cleaned and treated.
Window sills and trim
Depends on how deep it goesWood sills and trim with surface mold can often be cleaned. Trim that’s gone soft from years of condensation is replaced.
Drywall
Depends on how deep it goesSurface spots may clean; panels with growth through the paper come out.
Wood floors
Depends on how deep it goesSurface mold cleans; boards softened by crawl space moisture are replaced.
Carpet
Depends on how deep it goesCarpet in a damp ground-floor room that grew mold on the backing over the rainy season is replaced.
Furniture and clothing
Depends on how deep it goesSolid wood furniture usually cleans. Rain jackets, bedding, and upholstery with deep growth may not.
Photos and documents
Depends on how deep it goesPhotos and papers with mold can sometimes be cleaned and preserved by a document restoration specialist.
Crawl space and attic insulation
Usually removedBatt insulation in Eugene crawl spaces and attics that grew mold through the wet months is removed and replaced.
Old vapor barrier
Usually removedA crawl space vapor barrier that’s torn, missing, or covered in growth is pulled out and replaced.
Carpet pad
Usually removedCarpet pad that wicked up moisture and grew mold is thrown out.
Do You Need a Mold Test?
Often not. If you can see the mold and it clearly comes from condensation or a damp crawl space, testing rarely changes what needs to be done. It’s more useful when there’s a smell without visible growth, or when a landlord, tenant, buyer, or doctor needs documentation.
If testing helps, we’ll explain the options and can arrange an outside tester for before-and-after results.
Stop the water behind the mold
Other restoration services we offer in Eugene
Every job starts with a free inspection and estimate. Here’s how the 24 Hour Flood Pros team helps with each type of damage.
Smoke and soot from a kitchen or wood stove fire spread through closed-up winter homes. Soot is acidic and keeps staining surfaces, so cleanup starts early. We remove soot, treat odor at the source, clean what can be saved, and rebuild what can’t.
More about Fire and Smoke Damage
Winter windstorms drop firs and maples on Lane County roofs. We dry the structure, remove damaged materials, and repair the ceilings and walls inside.
More about Storm Damage
Mold in rentals, offices, or shops near campus needs careful planning. We extract, dry, and clean on a plan built around reopening, and we document each step for your carrier.
More about Commercial Restoration
When you’re ready to rebuild, the same crew puts it back together, from drywall to cabinets to the final coat of paint, so there’s no second contractor to hire.
More about ReconstructionDealing with one of these?
Call (503) 871-4844Call and talk to our crew about what happened. The call is free, and so is the inspection.
Our process
What happens after you call
- 1
You call, we send a crew
Call (503) 871-4844 any time, day or night, including weekends and holidays. Tell us what you’re seeing or smelling, and where. We’ll send a crew right away.
- 2
We inspect and find the source
The 24 Hour Flood Pros team looks for the moisture feeding the mold. We use moisture meters to find water hiding inside walls, under floors, and in the crawlspace. We take photos for your insurance. The inspection is free.
- 3
We close off the area
We seal the work area with plastic and set up HEPA air scrubbers, so spores don’t spread to clean rooms. The heat and air stay off in that area while we work.
- 4
We stop the moisture
We dry out the water and show you what’s causing it. If a plumber, a roofer, or an HVAC tech needs to fix a leak, we tell you before we go further.
- 5
We remove moldy materials
Drywall, insulation, and carpet pad with mold growing in them are cut out, bagged, and carried out. That way we only remove what really needs it.
- 6
We clean and dry what stays
Framing, subfloor, and other solid surfaces are HEPA-vacuumed, cleaned, and treated. Then we dry them until they read close to a dry room elsewhere in the house.
- 7
We make the repairs
When you’re ready, the 24 Hour Flood Pros team fixes the damage. We replace drywall, install cabinets, and finish with fresh paint. Our goal is to make your home look the way it did before.
- 8
Final check with you
Before we take the plastic down, we check the area for any mold or dust left behind. Then we walk through it with you and send the final records to your insurance company to close out the claim.
Mold on the window sills every winter?
Call (503) 871-4844That points to indoor humidity too high for a Eugene winter. Call us for a free inspection.
Insurance and claims
Mold remediation and your insurance claim
Sometimes. Many homeowners policies cover mold when it comes from a sudden, covered water event, like a burst pipe or a water heater that gives out. Mold from a slow leak or ongoing humidity is often excluded, and some policies cap mold coverage at a set amount.
Your policy decides what’s covered, not us. We work with all major insurance carriers, including State Farm, Allstate, Liberty Mutual, Farmers, American Family, Travelers, and Nationwide, and we keep the paperwork clear enough that your claim doesn’t stall.
Report it soon after you find it. Waiting can make it harder to show the mold came from a sudden event.
If a claim stalls, you can file a complaint with Oregon’s Division of Financial Regulation.
What your adjuster will ask for
- When you first noticed the mold or the smell
- What caused the moisture, and when it started
- Photos of the mold and any water damage
- Receipts for any work already done on the leak
What we send them
- Date-stamped photos of each affected area
- Moisture readings showing where the water is
- A line-by-line estimate for removal and rebuild
- One point of contact for your adjuster
Where we work
Areas we serve around Eugene
We serve Eugene, Springfield, and communities across the southern Willamette Valley.
Counties
- Lane County
- Linn County
Nearby cities
- Springfield
- Cottage Grove
- Junction City
- Creswell
- Veneta
- Coburg
- Albany
- Harrisburg
- Lowell
- Pleasant Hill
Don't see your area listed? Call us and we'll tell you right away.
Call (503) 871-4844Interactive map · Drag to move · Ctrl + scroll to zoom (⌘ on Mac)Interactive map · Use two fingers to move and zoom
Nearby locations
Looking for a different location?
On the wrong page, or is another location closer to you? Here are our nearest locations.
Portland, OR
View Portland mold remediation services →Seattle, WA
View Seattle mold remediation services →Common questions
Eugene mold remediation FAQs
How fast can 24 Hour Flood Pros get to me?
A crew can be there within 45 minutes. We work 24/7, including nights, weekends, and holidays, so you can call the moment you find mold or a leak.
Is black mold dangerous?
Any mold growing indoors should be removed, whatever its color. The CDC’s advice is that you don’t need to know the type of mold to deal with it. Mold can trigger allergies and asthma, so people with breathing problems or weak immune systems should stay away from it.
Can I clean mold myself?
For a small area, yes. The EPA says a patch under about 10 square feet, roughly 3 feet by 3 feet, can usually be cleaned with detergent and water while you wear gloves, eye protection, and a mask. Call a professional for anything larger, mold in the heating and air system, mold after sewage or flood water, or mold that keeps coming back.
Do I need a mold test before remediation?
Usually not if you can see the mold. Testing is most useful when you smell mold but can’t find it, or to confirm the cleanup worked.
Will the mold come back after remediation?
Not if the moisture is fixed. Mold comes back when the leak, the drainage problem, or the humidity is still there. That’s why every job starts with finding the source, and why we dry everything before the walls are closed.
Do I need to leave my home during mold remediation?
Usually not. We seal off the work area and filter the air, so most people stay home. For large jobs, or if someone in the house has breathing problems, we’ll tell you in advance if staying somewhere else makes sense.
How much does mold remediation cost in Eugene?
It depends on how big the area is, what has to be removed, how hard it is to reach, and what it takes to stop the moisture. A bathroom wall costs far less than a whole crawlspace or attic. The inspection and estimate are free, so you know the cost before any work starts.
How long does mold remediation take?
A small area can take a few days. Crawlspaces, attics, and rooms that need rebuilding take longer. Your estimate includes a schedule.
Does Oregon require a license for mold remediation?
Oregon doesn’t issue a specific state license for mold remediation, so it’s worth checking a company’s training and certifications before you hire it. 24 Hour Flood Pros is an IICRC Certified Firm, #70120685.
Available 24/7
Get a free inspection
Day or night, weekend or holiday, call (503) 871-4844. A crew can be there within 45 minutes to start your free inspection.
Call (503) 871-4844Or request a free inspection online
Tell us what happened and we'll call you right back.