Frozen pipes and creek flooding soak homes. We extract the standing water, set up dehumidifiers and air movers, and take moisture readings every day until the floors and framing test dry.
More about Water Damage
Available 24/7 · Salem and nearby areas
Mold Remediation in Salem, OR
A leak under a manufactured home, a well tank drip, or condensation can feed mold. Our crew handles mold remediation in Salem, OR, finds the moisture behind it, and dries the space out. Call any time, day or night.
Call (833) 243-566345minutes
IICRC Certified Firm#70120685
We work with all major insurance carriers
Mold help
Mold in Salem homes
The area has many manufactured homes and rural houses. They face mold risks city homes don’t. Under a manufactured home, a leaking supply line or drain can soak the insulation inside the belly wrap. That water may sit there unseen for months.
Rural homes on wells add another source. Pressure tanks, well lines, and water softeners in garages, pump houses, or utility rooms can leak slowly. The wet wall or floor nearby can grow mold before anyone notices.
Ice storms make it worse. During the February 2021 ice storm, many Salem-area homes went days without power. With no heat, indoor humidity climbs and condenses on cold walls, and pipes can freeze and split.
Homeowners, property managers, and business owners across Marion, Polk, Linn, Yamhill, Benton, and Clackamas counties call us about mold all year round.
Call Now (833) 243-5663Mold remediation at a glance
What’s included
Drying out manufactured home bellies, well rooms, and walls after outages, sealing off the area, removing moldy materials, HEPA cleaning, and repairs.
Typical timeline
A utility room or bathroom can take a day or two. A manufactured home belly or several rooms after an outage can take a week or more.
How cost is set
The size of the area, whether it’s under a manufactured home, what has to come out, and the repairs.
First visit
Call (833) 243-5663A free inspection and estimate before any work starts.
Found mold?
What to do when you find mold
Finding mold is stressful, but you have time to do this right. Acting in the first day or two keeps it from spreading.
Not sure how big the problem is? Call and talk it through with our crew.
Call (833) 243-5663What to do
Look for the water
Check above and around the mold for a drip, a damp spot, or a stain. Stopping the water stops the mold from growing.
Bring the humidity down
Run the air conditioning or a dehumidifier. The EPA recommends keeping indoor humidity below 60%, ideally between 30% and 50%.
Take photos
Photograph the mold and any water damage before anything is cleaned. Your insurance company may ask for them.
Clean small spots the right way
For a patch under about 10 square feet, the EPA says you can usually clean it yourself with detergent and water. Wear gloves, eye protection, and a mask.
Keep sensitive people away
Anyone with asthma, allergies, or a weak immune system should stay out of the area until the mold is gone.
What not to do
Don’t scrub or sand it dry
Dry mold sends spores into the air and through the house. Keep the surface damp while you clean it, or leave it for a pro.
Don’t bleach it and paint over it
Bleach can whiten the surface, but on drywall and wood it doesn’t reach the mold growing inside. Paint over mold peels, and the mold keeps growing underneath.
Don’t point fans at it
Fans blowing across mold carry the spores into other rooms.
Don’t run the heat or air if the mold is in the ducts
The system will blow spores through the whole house. Leave it off until it’s been checked.
Don’t buy a test kit first
If you can see mold, the EPA says testing usually isn’t needed. Spend the money on finding the leak.
Where mold hides
Where we find mold in Salem homes
Around Salem, mold usually comes from under manufactured homes, well equipment, outages, or creek flooding.
Manufactured Home Bellies
Leaks above the belly wrap soak insulation under the floor and can sit unseen for months.
Attics After Ice Storms
Ice-laden limbs damage roofs, and leaks soak attic insulation.
Bathrooms and Laundry Rooms
Steam and slow leaks feed mold in walls and floors.
Well Pressure Tanks and Softeners
Slow leaks in pump houses and utility rooms dampen walls and floors.
Mill Creek and Pringle Creek Flooding
High water can push into low-lying homes and garages.
Frozen Pipes During Outages
Pipes that freeze when the power is out can split and soak walls.
How we remove mold
How we remove mold
Mold around Salem returns unless the moisture source is fixed. We start by finding it, whether it’s under the home, at the well equipment, or from an outage.
We seal off the area. Indoors, plastic barriers and HEPA air scrubbers protect the living space. Under a manufactured home, we contain the work area beneath the floor.
We remove and clean. Moldy belly insulation, drywall, paneling, and carpet come out, and framing is cleaned and treated.
We dry and repair. Readings must match a dry area before we rebuild or reseal the belly wrap.
What the signs usually mean
Sagging, damp belly wrap under a manufactured home
What it usually meansA leak trapping water in the underfloor insulation
What to doHave the belly opened, dried, and the leak fixed.
Mildew around the well pressure tank
What it usually meansA slow leak at the tank, fittings, or softener
What to doFix the leak and have the nearby walls and floor checked.
Spots on walls after a long outage
What it usually meansCondensation while the heat was off
What to doRestore heat and have the walls checked.
A wall stain after a hard freeze
What it usually meansA pipe that split while the power was out
What to doHave the wall opened and the pipe repaired.
Musty garage after creek flooding
What it usually meansFloodwater soaking walls and stored items
What to doHave the walls checked and dried.
A musty mid-valley home with nothing visible
What it usually meansGrowth inside the belly wrap, behind paneling, or under the subfloor
What to doBook an inspection so we can take moisture readings in hidden spots.
What can be saved
What can be cleaned and what gets replaced
For Salem-area homes, manufactured homes, and farm buildings, what we keep depends on the material, how long it stayed wet, and how far growth reached. The inspection confirms each item.
Tile, metal, glass, and stone
Usually cleanedHard surfaces clean well.
Floor joists and framing
Usually cleanedFloor joists and rim boards in mid-valley homes with only surface growth can usually be cleaned, treated, and kept.
Wall paneling in manufactured homes
Depends on how deep it goesSurface growth may clean; swollen paneling is replaced.
Drywall
Depends on how deep it goesDrywall in a site-built Salem home with a few spots may clean. Panels soaked by a split pipe during an outage are cut out.
Particleboard subfloor
Depends on how deep it goesSubfloor that swelled from a leak usually needs replacement.
Carpet
Depends on how deep it goesCarpet over a manufactured home subfloor that grew mold on its backing is replaced.
Furniture
Depends on how deep it goesFarmhouse tables and wood dressers generally recover. A couch or mattress that sat in a cold, damp room during an outage often doesn’t.
Photos and documents
Depends on how deep it goesFamily photos and farm records can sometimes be cleaned and preserved by a document specialist.
Belly insulation
Usually removedWet, moldy insulation under a manufactured home is replaced.
Stored hay and feed
Usually removedMoldy feed should be thrown out for the animals’ safety.
Carpet pad
Usually removedPad with growth is replaced.
Do You Need a Mold Test?
Usually not. When the mold is visible and the source is clear, like a leak under a manufactured home or an outage, testing seldom changes the plan. It helps when you smell mold but can’t find it, or when a buyer or lender needs documentation.
When a test helps, we’ll explain sampling and can line up an outside tester for a manufactured home sale or refinance.
Stop the water behind the mold
Other restoration services we offer in Salem
Every job starts with a free inspection and estimate. Here’s how the 24 Hour Flood Pros team helps with each type of damage.
When an ice storm knocks out power, generators and space heaters can start fires. Soot is acidic and keeps staining surfaces, so cleanup starts early. We remove soot, treat odor at the source, clean what can be saved, and rebuild what can’t.
More about Fire and Smoke Damage
Ice storms and windstorms bring trees down on mid-valley roofs. We dry the structure, remove damaged materials, and repair the ceilings and walls inside.
More about Storm Damage
Mold in offices, farm businesses, or shops needs careful planning. We extract, dry, and clean on a plan built around reopening, and we document each step for your carrier.
More about Commercial Restoration
When you’re ready to rebuild, the same crew puts it back together, from drywall to cabinets to the final coat of paint, so there’s no second contractor to hire.
More about ReconstructionDealing with one of these?
Call (833) 243-5663Call and talk to our crew about what happened. The call is free, and so is the inspection.
Our process
What happens after you call
- 1
You call, we send a crew
Call (833) 243-5663 any time, day or night, including weekends and holidays. Tell us what you’re seeing or smelling, and where. We’ll send a crew right away.
- 2
We inspect and find the source
The 24 Hour Flood Pros team looks for the moisture feeding the mold. We use moisture meters to find water hiding inside walls, under floors, and in the crawlspace. We take photos for your insurance. The inspection is free.
- 3
We close off the area
We seal the work area with plastic and set up HEPA air scrubbers, so spores don’t spread to clean rooms. The heat and air stay off in that area while we work.
- 4
We stop the moisture
We dry out the water and show you what’s causing it. If a plumber, a roofer, or an HVAC tech needs to fix a leak, we tell you before we go further.
- 5
We remove moldy materials
Drywall, insulation, and carpet pad with mold growing in them are cut out, bagged, and carried out. That way we only remove what really needs it.
- 6
We clean and dry what stays
Framing, subfloor, and other solid surfaces are HEPA-vacuumed, cleaned, and treated. Then we dry them until they read close to a dry room elsewhere in the house.
- 7
We make the repairs
When you’re ready, the 24 Hour Flood Pros team fixes the damage. We replace drywall, install cabinets, and finish with fresh paint. Our goal is to make your home look the way it did before.
- 8
Final check with you
Before we take the plastic down, we check the area for any mold or dust left behind. Then we walk through it with you and send the final records to your insurance company to close out the claim.
Sagging belly wrap under your home?
Call (833) 243-5663A low, damp spot under a manufactured home often means a hidden leak and mold. Call us for a free inspection.
Insurance and claims
Mold remediation and your insurance claim
Sometimes. Many homeowners policies cover mold when it comes from a sudden, covered water event, like a burst pipe or a water heater that gives out. Mold from a slow leak or ongoing humidity is often excluded, and some policies cap mold coverage at a set amount.
Your policy decides what’s covered, not us. We work with all major insurance carriers, including State Farm, Allstate, Liberty Mutual, Farmers, American Family, Travelers, and Nationwide, and we keep the paperwork clear enough that your claim doesn’t stall.
Report it soon after you find it. Waiting can make it harder to show the mold came from a sudden event.
If a claim stalls, you can file a complaint with Oregon’s Division of Financial Regulation.
What your adjuster will ask for
- When you first noticed the mold or the smell
- What caused the moisture, and when it started
- Photos of the mold and any water damage
- Receipts for any work already done on the leak
What we send them
- Date-stamped photos of each affected area
- Moisture readings showing where the water is
- A line-by-line estimate for removal and rebuild
- One point of contact for your adjuster
Where we work
Areas we serve around Salem
We serve Salem, Keizer, and towns across the mid-Willamette Valley.
Counties
- Marion County
- Polk County
- Linn County
- Yamhill County
- Benton County
- Clackamas County
Nearby cities
- Keizer
- Woodburn
- Silverton
- Stayton
- Turner
- Dallas
- Monmouth
- Independence
- Albany
- Corvallis
- McMinnville
- Canby
Don't see your area listed? Call us and we'll tell you right away.
Call (833) 243-5663Interactive map · Drag to move · Ctrl + scroll to zoom (⌘ on Mac)Interactive map · Use two fingers to move and zoom
Nearby locations
Looking for a different location?
On the wrong page, or is another location closer to you? Here are our nearest locations.
Portland, OR
View Portland mold remediation services →Eugene, OR
View Eugene mold remediation services →Seattle, WA
View Seattle mold remediation services →Common questions
Salem mold remediation FAQs
How fast can 24 Hour Flood Pros get to me?
A crew can be there within 45 minutes. We work 24/7, including nights, weekends, and holidays, so you can call the moment you find mold or a leak.
Is black mold dangerous?
Any mold growing indoors should be removed, whatever its color. The CDC’s advice is that you don’t need to know the type of mold to deal with it. Mold can trigger allergies and asthma, so people with breathing problems or weak immune systems should stay away from it.
Can I clean mold myself?
For a small area, yes. The EPA says a patch under about 10 square feet, roughly 3 feet by 3 feet, can usually be cleaned with detergent and water while you wear gloves, eye protection, and a mask. Call a professional for anything larger, mold in the heating and air system, mold after sewage or flood water, or mold that keeps coming back.
Do I need a mold test before remediation?
Usually not if you can see the mold. Testing is most useful when you smell mold but can’t find it, or to confirm the cleanup worked.
Will the mold come back after remediation?
Not if the moisture is fixed. Mold comes back when the leak, the drainage problem, or the humidity is still there. That’s why every job starts with finding the source, and why we dry everything before the walls are closed.
Do I need to leave my home during mold remediation?
Usually not. We seal off the work area and filter the air, so most people stay home. For large jobs, or if someone in the house has breathing problems, we’ll tell you in advance if staying somewhere else makes sense.
How much does mold remediation cost in Salem?
It depends on how big the area is, what has to be removed, how hard it is to reach, and what it takes to stop the moisture. A bathroom wall costs far less than a whole crawlspace or attic. The inspection and estimate are free, so you know the cost before any work starts.
How long does mold remediation take?
A small area can take a few days. Crawlspaces, attics, and rooms that need rebuilding take longer. Your estimate includes a schedule.
Does Oregon require a license for mold remediation?
Oregon doesn’t issue a specific state license for mold remediation, so it’s worth checking a company’s training and certifications before you hire it. 24 Hour Flood Pros is an IICRC Certified Firm, #70120685.
Available 24/7
Get a free inspection
Day or night, weekend or holiday, call (833) 243-5663. A crew can be there within 45 minutes to start your free inspection.
Call (833) 243-5663Or request a free inspection online
Tell us what happened and we'll call you right back.