Swamp cooler and plumbing leaks leave Albuquerque walls and floors wet. We extract the standing water, set up dehumidifiers and air movers, and take moisture readings every day until the floors and framing test dry.
More about Water Damage
Available 24/7 · Albuquerque and nearby areas
Mold Remediation in Albuquerque, NM
A leaking swamp cooler, a dripping roof, or a pipe drip can feed mold. Our crew handles mold remediation in Albuquerque, NM, finds the moisture behind it, and dries the space out. Call any time, day or night.
Call (505) 216-676045minutes
IICRC Certified Firm#70120685
We work with all major insurance carriers
Mold help
Mold in Albuquerque homes
People are often surprised to find mold in the high desert. Mold doesn’t need humid air, just steady water. Albuquerque homes get it from swamp coolers, flat roofs, and plumbing in slabs and stucco walls.
Swamp coolers are a common culprit. Coolers push moist air through the house all summer. A cracked pan or clogged drain can drip into the attic for weeks unnoticed.
Monsoon storms add another source. Water that ponds behind a parapet or slips past a clogged canale can soak ceiling insulation. The July 23, 2025 storms flooded homes in the North Valley.
Homeowners, property managers, and business owners call us about mold all year round. We work across Nob Hill, Old Town, Downtown, Uptown, Barelas, Northeast Heights, Four Hills, North Valley, South Valley, and Westside.
Call Now (505) 216-6760Mold remediation at a glance
What’s included
Finding the water source, sealing off the area, removing moldy materials, HEPA cleaning, drying, and repairs.
Typical timeline
A small area under a sink can be done in a day or two. Mold in an attic or behind several walls can take a week or more.
How cost is set
The size of the area, what has to come out, what’s feeding it, and the repairs afterward.
First visit
Call (505) 216-6760A free inspection and estimate before any work starts.
Found mold?
What to do when you find mold
Finding mold is stressful, but you have time to do this right. Acting in the first day or two keeps it from spreading.
Not sure how big the problem is? Call and talk it through with our crew.
Call (505) 216-6760What to do
Look for the water
Check above and around the mold for a drip, a damp spot, or a stain. Stopping the water stops the mold from growing.
Bring the humidity down
Run the air conditioning or a dehumidifier. The EPA recommends keeping indoor humidity below 60%, ideally between 30% and 50%.
Take photos
Photograph the mold and any water damage before anything is cleaned. Your insurance company may ask for them.
Clean small spots the right way
For a patch under about 10 square feet, the EPA says you can usually clean it yourself with detergent and water. Wear gloves, eye protection, and a mask.
Keep sensitive people away
Anyone with asthma, allergies, or a weak immune system should stay out of the area until the mold is gone.
What not to do
Don’t scrub or sand it dry
Dry mold sends spores into the air and through the house. Keep the surface damp while you clean it, or leave it for a pro.
Don’t bleach it and paint over it
Bleach can whiten the surface, but on drywall and wood it doesn’t reach the mold growing inside. Paint over mold peels, and the mold keeps growing underneath.
Don’t point fans at it
Fans blowing across mold carry the spores into other rooms.
Don’t run the heat or air if the mold is in the ducts
The system will blow spores through the whole house. Leave it off until it’s been checked.
Don’t buy a test kit first
If you can see mold, the EPA says testing usually isn’t needed. Spend the money on finding the leak.
Where mold hides
Where we find mold in Albuquerque homes
In Albuquerque, mold almost always traces back to one of a few water sources, and finding it is the first step.
Swamp Cooler Leaks
Cracked pans, worn pads, and clogged drain lines can drip into attics and down walls all summer.
Flat Roofs and Canales
Water ponding behind parapets or backing up from clogged canales seeps into ceiling insulation.
Bathrooms and Kitchens
Drips under Albuquerque sinks, tubs, and dishwashers let mold take over cabinets and nearby walls.
Stucco and Adobe Walls
Cracks in stucco and water wicking into adobe can trap moisture inside thick walls.
Monsoon Flooding
Monsoon runoff under the door leaves soaked drywall and carpet, and mold can follow within days.
Hidden Plumbing Leaks
Pipes in slab floors and walls can leak slowly for months before mold shows.
How we remove mold
How we remove mold
Killing visible mold isn’t enough if the water keeps coming. We start by finding and stopping the moisture source, whether it’s a cooler, a roof, or a pipe.
We seal off the work area. Plastic barriers and air scrubbers with HEPA filters keep spores from reaching the rest of the house.
We remove what can’t be cleaned. Moldy drywall, insulation, and carpet come out. Framing and other solid surfaces are cleaned and treated.
We dry and repair. Moisture readings confirm the area is dry before we rebuild, so the mold doesn’t come back.
What the signs usually mean
A musty smell when the cooler runs
What it usually meansMold in the cooler, ducts, or attic
What to doTurn off the cooler and have the system and attic checked.
Gray or brown ceiling spots after a monsoon
What it usually meansA roof or canale leak feeding mold in the insulation
What to doHave the roof fixed and the ceiling opened and checked.
Black spots in a bathroom corner
What it usually meansMoisture from showers or a hidden leak
What to doSmall spots may clean up; recurring growth needs a closer look.
Peeling paint or bubbling stucco inside
What it usually meansWater trapped in the wall
What to doHave the wall checked with a moisture meter.
Mold under the kitchen sink
What it usually meansA slow drip from the supply or drain line
What to doFix the leak and have the cabinet and wall behind it checked.
A smell but no visible mold
What it usually meansHidden growth in walls, ducts, or the attic
What to doCall for an inspection with moisture readings.
What can be saved
What can be cleaned and what gets replaced
Whether something can be cleaned depends on the material and how deep the mold has grown. These are typical results in Albuquerque homes, and the inspection confirms each item.
Tile, glass, metal, and stone
Usually cleanedHard surfaces like Saltillo tile and countertops clean well.
Wood framing and vigas
Usually cleanedSurface growth on solid wood can usually be cleaned and treated.
Stucco and adobe
Depends on how deep it goesSurface mold can often be cleaned. Water trapped inside thick walls needs drying first.
Drywall
Depends on how deep it goesSmall surface spots may clean. Drywall with growth through the paper is removed.
Hardwood floors
Depends on how deep it goesSurface mold can be cleaned. Boards rotted underneath are replaced.
Carpet
Depends on how deep it goesCarpet with mold on the backing is usually replaced.
Furniture and fabrics
Depends on how deep it goesHard furniture often cleans. Upholstery with deep growth may not.
Photos and documents
Depends on how deep it goesA specialist can sometimes save them.
Insulation
Usually removedMoldy insulation is removed and replaced.
Ceiling tiles and pad
Usually removedPorous materials with growth are replaced.
Cooler pads
Usually removedMoldy evaporative cooler pads are thrown out and replaced.
Do You Need a Mold Test?
Not always. If you can see the mold and know the water source, testing usually doesn’t change the plan. Testing makes more sense when you smell mold but can’t find it, or when a buyer, landlord, or doctor needs documentation.
If testing is needed, we can explain the options. In some cases, an independent tester provides a clear report before and after the work.
Stop the water behind the mold
Other restoration services we offer in Albuquerque
Every job starts with a free inspection and estimate. Here’s how the 24 Hour Flood Pros team helps with each type of damage.
Kitchen and electrical fires leave soot and a lasting smell in Albuquerque homes. Soot is acidic and keeps staining surfaces, so cleanup starts early. We remove soot, treat odor at the source, clean what can be saved, and rebuild what can’t.
More about Fire and Smoke Damage
Monsoon storms can damage flat roofs and send runoff inside. We dry the structure, remove damaged materials, and repair the ceilings and walls inside.
More about Storm Damage
Mold in an Albuquerque office, restaurant, or rental takes planning around the people using it. We extract, dry, and clean on a plan built around reopening, and we document each step for your carrier.
More about Commercial Restoration
When you’re ready to rebuild, the same crew puts it back together, from drywall to cabinets to the final coat of paint, so there’s no second contractor to hire.
More about ReconstructionDealing with one of these?
Call (505) 216-6760Call and talk to our crew about what happened. The call is free, and so is the inspection.
Our process
What happens after you call
- 1
You call, we send a crew
Call (505) 216-6760 any time, day or night, including weekends and holidays. Tell us what you’re seeing or smelling, and where. We’ll send a crew right away.
- 2
We inspect and find the source
The 24 Hour Flood Pros team looks for the moisture feeding the mold. We use moisture meters to find water hiding inside walls, under floors, and in the crawlspace. We take photos for your insurance. The inspection is free.
- 3
We close off the area
We seal the work area with plastic and set up HEPA air scrubbers, so spores don’t spread to clean rooms. The heat and air stay off in that area while we work.
- 4
We stop the moisture
We dry out the water and show you what’s causing it. If a plumber, a roofer, or an HVAC tech needs to fix a leak, we tell you before we go further.
- 5
We remove moldy materials
Drywall, insulation, and carpet pad with mold growing in them are cut out, bagged, and carried out. That way we only remove what really needs it.
- 6
We clean and dry what stays
Framing, subfloor, and other solid surfaces are HEPA-vacuumed, cleaned, and treated. Then we dry them until they read close to a dry room elsewhere in the house.
- 7
We make the repairs
When you’re ready, the 24 Hour Flood Pros team fixes the damage. We replace drywall, install cabinets, and finish with fresh paint. Our goal is to make your home look the way it did before.
- 8
Final check with you
Before we take the plastic down, we check the area for any mold or dust left behind. Then we walk through it with you and send the final records to your insurance company to close out the claim.
Smell mold when the cooler runs?
Call (505) 216-6760A musty smell from the vents often means mold in the cooler, ducts, or attic. Call us for a free inspection.
Insurance and claims
Mold remediation and your insurance claim
Sometimes. Many homeowners policies cover mold when it comes from a sudden, covered water event, like a burst pipe or a water heater that gives out. Mold from a slow leak or ongoing humidity is often excluded, and some policies cap mold coverage at a set amount.
Your policy decides what’s covered, not us. We work with all major insurance carriers, including State Farm, Allstate, Liberty Mutual, Farmers, American Family, Travelers, and Nationwide, and we keep the paperwork clear enough that your claim doesn’t stall.
Report it soon after you find it. Waiting can make it harder to show the mold came from a sudden event.
If a claim stalls, you can file a complaint with New Mexico’s Office of Superintendent of Insurance.
What your adjuster will ask for
- When you first noticed the mold or the smell
- What caused the moisture, and when it started
- Photos of the mold and any water damage
- Receipts for any work already done on the leak
What we send them
- Date-stamped photos of each affected area
- Moisture readings showing where the water is
- A line-by-line estimate for removal and rebuild
- One point of contact for your adjuster
Where we work
Areas we serve around Albuquerque
We serve Albuquerque on both banks of the Rio Grande and the towns nearby.
Albuquerque neighborhoods
- Nob Hill
- Old Town
- Downtown
- Uptown
- Barelas
- Northeast Heights
- Four Hills
- North Valley
- South Valley
- Westside
Nearby cities
- Rio Rancho
- Corrales
- Los Ranchos de Albuquerque
- Bernalillo
- Placitas
- Los Lunas
- Bosque Farms
- Belen
- Tijeras
- Edgewood
- Sandia Park
- Peralta
Don't see your area listed? Call us and we'll tell you right away.
Call (505) 216-6760Interactive map · Drag to move · Ctrl + scroll to zoom (⌘ on Mac)Interactive map · Use two fingers to move and zoom
Common questions
Albuquerque mold remediation FAQs
How fast can 24 Hour Flood Pros get to me?
A crew can be there within 45 minutes. We work 24/7, including nights, weekends, and holidays, so you can call the moment you find mold or a leak.
Is black mold dangerous?
Any mold growing indoors should be removed, whatever its color. The CDC’s advice is that you don’t need to know the type of mold to deal with it. Mold can trigger allergies and asthma, so people with breathing problems or weak immune systems should stay away from it.
Can I clean mold myself?
For a small area, yes. The EPA says a patch under about 10 square feet, roughly 3 feet by 3 feet, can usually be cleaned with detergent and water while you wear gloves, eye protection, and a mask. Call a professional for anything larger, mold in the heating and air system, mold after sewage or flood water, or mold that keeps coming back.
Do I need a mold test before remediation?
Usually not if you can see the mold. Testing is most useful when you smell mold but can’t find it, or to confirm the cleanup worked.
Will the mold come back after remediation?
Not if the moisture is fixed. Mold comes back when the leak, the drainage problem, or the humidity is still there. That’s why every job starts with finding the source, and why we dry everything before the walls are closed.
Do I need to leave my home during mold remediation?
Usually not. We seal off the work area and filter the air, so most people stay home. For large jobs, or if someone in the house has breathing problems, we’ll tell you in advance if staying somewhere else makes sense.
How much does mold remediation cost in Albuquerque?
It depends on how big the area is, what has to be removed, how hard it is to reach, and what it takes to stop the moisture. A bathroom wall costs far less than a whole crawlspace or attic. The inspection and estimate are free, so you know the cost before any work starts.
How long does mold remediation take?
A small area can take a few days. Crawlspaces, attics, and rooms that need rebuilding take longer. Your estimate includes a schedule.
Does New Mexico require a license for mold remediation?
New Mexico doesn’t issue a specific state license for mold remediation, so it’s worth checking a company’s training and certifications before you hire it. 24 Hour Flood Pros is an IICRC Certified Firm, #70120685.
Available 24/7
Get a free inspection
Day or night, weekend or holiday, call (505) 216-6760. A crew can be there within 45 minutes to start your free inspection.
Call (505) 216-6760Or request a free inspection online
Tell us what happened and we'll call you right back.