Slab leaks, supply line breaks, and monsoon flooding soak floors and walls. We extract the standing water, set up dehumidifiers and air movers, and take moisture readings every day until the floors and framing test dry.
More about Water Damage
Available 24/7 · Phoenix and nearby areas
Yard irrigation, an AC drain overflow, or a hidden drip can feed mold. Our crew handles mold remediation in Phoenix, AZ, finds the moisture behind it, and dries the space out. Call any time, day or night.
Call (480) 738-9624
We work with all major insurance carriers
Mold help

In the Sonoran Desert, mold almost always means water is getting somewhere it shouldn’t, and Phoenix has some unusual sources. Arcadia and parts of central Phoenix still flood-irrigate. That water soaks the soil against foundations and pushes moisture into walls.
Outdoor cooling adds water too. Patio misters, leaky pool equipment, and sprinklers hitting stucco can keep a wall’s base wet all summer. Moisture then wicks into drywall and baseboards.
Indoors, attic AC units run almost nonstop through 110-degree months. A clogged condensate line overflows onto ceiling drywall. Monsoons, like the record September 2014 storm, find gaps in tile and flat roofs.
Homeowners, property managers, and business owners call us about mold all year round. We work across Arcadia, Ahwatukee, Biltmore, Encanto, Maryvale, Laveen, Deer Valley, Desert Ridge, Sunnyslope, and Moon Valley.
Call Now (480) 738-9624Tracing irrigation, mister, AC, and plumbing leaks, containment, removing moldy materials, HEPA cleaning, drying, and repairs.
A spot behind a vanity takes a day or two. Walls soaked by irrigation or a long AC leak can take a week or more.
Price depends on how much wall or ceiling comes out, what the water source was, and what gets rebuilt.
A free inspection and estimate before any work starts.
Found mold?
Finding mold is stressful, but you have time to do this right. Acting in the first day or two keeps it from spreading.
Not sure how big the problem is? Call and talk it through with our crew.
Call (480) 738-9624Check above and around the mold for a drip, a damp spot, or a stain. Stopping the water stops the mold from growing.
Run the air conditioning or a dehumidifier. The EPA recommends keeping indoor humidity below 60%, ideally between 30% and 50%.
Photograph the mold and any water damage before anything is cleaned. Your insurance company may ask for them.
For a patch under about 10 square feet, the EPA says you can usually clean it yourself with detergent and water. Wear gloves, eye protection, and a mask.
Anyone with asthma, allergies, or a weak immune system should stay out of the area until the mold is gone.
Dry mold sends spores into the air and through the house. Keep the surface damp while you clean it, or leave it for a pro.
Bleach can whiten the surface, but on drywall and wood it doesn’t reach the mold growing inside. Paint over mold peels, and the mold keeps growing underneath.
Fans blowing across mold carry the spores into other rooms.
The system will blow spores through the whole house. Leave it off until it’s been checked.
If you can see mold, the EPA says testing usually isn’t needed. Spend the money on finding the leak.
Where mold hides
Around the Valley, mold usually traces back to irrigation, outdoor water fixtures, the AC, or monsoon leaks.
Water from flood irrigation soaks the soil against foundations and seeps into walls and slabs.
A Phoenix attic can top 140 degrees in July, and the AC working beneath it sheds gallons of condensate a day. If the line clogs, the overflow lands on the ceiling drywall.
Leaks under sinks and behind dishwashers feed growth inside cabinets.
Constant spray and leaking pool lines keep exterior walls wet.
When aging felt under concrete tile roofs gives out, a monsoon cell sends water straight into the attic.
Supply lines under a Phoenix slab can leak quietly for months before mold appears.
How we remove mold
Mold in Phoenix stops when the water does. We start by finding the source, which might be outside the house, like irrigation, misters, or pool equipment.
We contain the work zone. Plastic barriers and HEPA air scrubbers keep spores out of the return-air grilles, which matters when the AC can’t be off for long in summer.
We remove and clean. Moldy drywall, baseboards, and insulation come out, and framing is cleaned and treated.
We dry and rebuild. The dry air helps, and readings must match a dry room before repairs. We can also point out irrigation and drainage changes.
What it usually meansIrrigation water moving under the slab or into the wall
What to doHave the wall checked and the irrigation flow looked at.
What it usually meansMisters or sprinklers soaking the stucco
What to doTurn off the misters and have the wall checked.
What it usually meansThe condensate line clogged and the pan overflowed
What to doHave the line flushed and the drywall and insulation above checked.
What it usually meansA slow drip from the RO system, disposal, or supply valve
What to doFix the drip, then have the cabinet base and the wall behind it checked.
What it usually meansRain getting past cracked tiles or tired underlayment
What to doHave a roofer check the tile and us check the attic.
What it usually meansGrowth inside a wall near the irrigation side, or under laminate
What to doBook an inspection so we can take moisture readings behind the surfaces.
What can be saved
For Valley homes, our call on clean versus replace depends on the material, how often water reached it, and how far growth spread. The inspection confirms each item.
Saltillo and porcelain tile and hard surfaces clean well.
Studs and top plates with surface growth from a mister or irrigation leak can be cleaned, treated, and left in place.
Surface growth cleans once the outside water source is stopped.
The lower part of walls wet from irrigation is often cut out; dry sections can stay.
Laminate and engineered wood that trapped moisture from a slab or irrigation leak are lifted and replaced.
Flooring that trapped moisture is replaced.
Wedding albums and important papers can sometimes be cleaned by a document specialist.
Wet photos and papers can sometimes be restored by a specialist, though the dry heat can curl and crack them, so act quickly.
Carpet pad that wicked moisture from the slab and grew mold is replaced.
Pad with growth is replaced.
Moldy particleboard shelving and cabinet bases are thrown out.
Usually not. When the mold is visible and the water source is clear, testing rarely changes the plan. It helps more when you smell mold but can’t find it, or when a buyer, landlord, or doctor needs documentation.
If sampling is warranted, an outside tester can check the air and surfaces before and after our work, and we’ll coordinate it.
Stop the water behind the mold
Every job starts with a free inspection and estimate. Here’s how the 24 Hour Flood Pros team helps with each type of damage.
Slab leaks, supply line breaks, and monsoon flooding soak floors and walls. We extract the standing water, set up dehumidifiers and air movers, and take moisture readings every day until the floors and framing test dry.
More about Water Damage
When an attic AC unit or electrical panel catches fire in summer heat, soot spreads fast. Soot is acidic and keeps staining surfaces, so cleanup starts early. We remove soot, treat odor at the source, clean what can be saved, and rebuild what can’t.
More about Fire and Smoke Damage
Monsoon microbursts and hail crack tiles and tear flat-roof membranes across the Valley. We dry the structure, remove damaged materials, and repair the ceilings and walls inside.
More about Storm Damage
Mold in a Scottsdale resort room block, a Tempe restaurant, or a downtown office needs a contained plan that keeps business going. We extract, dry, and clean on a plan built around reopening, and we document each step for your carrier.
More about Commercial Restoration
When you’re ready to rebuild, the same crew puts it back together, from drywall to cabinets to the final coat of paint, so there’s no second contractor to hire.
More about ReconstructionCall and talk to our crew about what happened. The call is free, and so is the inspection.
Our process
Call (480) 738-9624 any time, day or night, including weekends and holidays. Tell us what you’re seeing or smelling, and where. We’ll send a crew right away.
The 24 Hour Flood Pros team looks for the moisture feeding the mold. We use moisture meters to find water hiding inside walls, under floors, and in the crawlspace. We take photos for your insurance. The inspection is free.
We seal the work area with plastic and set up HEPA air scrubbers, so spores don’t spread to clean rooms. The heat and air stay off in that area while we work.
We dry out the water and show you what’s causing it. If a plumber, a roofer, or an HVAC tech needs to fix a leak, we tell you before we go further.
Drywall, insulation, and carpet pad with mold growing in them are cut out, bagged, and carried out. That way we only remove what really needs it.
Framing, subfloor, and other solid surfaces are HEPA-vacuumed, cleaned, and treated. Then we dry them until they read close to a dry room elsewhere in the house.
When you’re ready, the 24 Hour Flood Pros team fixes the damage. We replace drywall, install cabinets, and finish with fresh paint. Our goal is to make your home look the way it did before.
Before we take the plastic down, we check the area for any mold or dust left behind. Then we walk through it with you and send the final records to your insurance company to close out the claim.
Flood irrigation can push water under the slab and into walls. Call us for a free inspection.
Insurance and claims
Sometimes. Many homeowners policies cover mold when it comes from a sudden, covered water event, like a burst pipe or a water heater that gives out. Mold from a slow leak or ongoing humidity is often excluded, and some policies cap mold coverage at a set amount.
Your policy decides what’s covered, not us. We work with all major insurance carriers, including State Farm, Allstate, Liberty Mutual, Farmers, American Family, Travelers, and Nationwide, and we keep the paperwork clear enough that your claim doesn’t stall.
Report it soon after you find it. Waiting can make it harder to show the mold came from a sudden event.
If a claim stalls, you can file a complaint with the Arizona Department of Insurance and Financial Institutions.
Where we work
We cover Phoenix and the surrounding Valley cities.
Don't see your area listed? Call us and we'll tell you right away.
Call (480) 738-9624Interactive map · Drag to move · Ctrl + scroll to zoom (⌘ on Mac)Interactive map · Use two fingers to move and zoom
Nearby locations
On the wrong page, or is another location closer to you? Here are our nearest locations.
Common questions
A crew can be there within 45 minutes. We work 24/7, including nights, weekends, and holidays, so you can call the moment you find mold or a leak.
Any mold growing indoors should be removed, whatever its color. The CDC’s advice is that you don’t need to know the type of mold to deal with it. Mold can trigger allergies and asthma, so people with breathing problems or weak immune systems should stay away from it.
For a small area, yes. The EPA says a patch under about 10 square feet, roughly 3 feet by 3 feet, can usually be cleaned with detergent and water while you wear gloves, eye protection, and a mask. Call a professional for anything larger, mold in the heating and air system, mold after sewage or flood water, or mold that keeps coming back.
Usually not if you can see the mold. Testing is most useful when you smell mold but can’t find it, or to confirm the cleanup worked.
Not if the moisture is fixed. Mold comes back when the leak, the drainage problem, or the humidity is still there. That’s why every job starts with finding the source, and why we dry everything before the walls are closed.
Usually not. We seal off the work area and filter the air, so most people stay home. For large jobs, or if someone in the house has breathing problems, we’ll tell you in advance if staying somewhere else makes sense.
It depends on how big the area is, what has to be removed, how hard it is to reach, and what it takes to stop the moisture. A bathroom wall costs far less than a whole crawlspace or attic. The inspection and estimate are free, so you know the cost before any work starts.
A small area can take a few days. Crawlspaces, attics, and rooms that need rebuilding take longer. Your estimate includes a schedule.
Arizona doesn’t issue a specific state license for mold remediation, so it’s worth checking a company’s training and certifications before you hire it. 24 Hour Flood Pros is an IICRC Certified Firm, #70120685.
Available 24/7
Day or night, weekend or holiday, call (480) 738-9624. A crew can be there within 45 minutes to start your free inspection.
Call (480) 738-9624Tell us what happened and we'll call you right back.